SWTB_Banner_Left_LogoOnly

2005

clearpixel

HOME PRODUCT
DETAILS FREE
DEMO PRICING &
LICENSING RELATED
PRODUCTS SUPPORT ABOUT
US

SWTB_7Button_BlueLine

April 2005 OPC Interop Workshop

Intro | Testing | Servers Tested

Intro

The OPC Data Control tested flawlessly again at this years OPC Interop held in Tampa, FL. With a record attendance and more vendors being present than ever we were able to test with more OPC Servers than ever before.

Testing

We adopted the same test patterns as used in previous interoperability workshops, which included: Synch Reads, Synch Writes, and Asynch Subscription reads. We also tested varying update rates including extremely high update rates, deadband settings, and simultaneous high speed reads. Where supported, we also tested Array Variable read/writes - not all OPC servers support arrays but for those that did, we tested.  The entire workshop was done via DCOM connections over a 100 Mb network with all client and server machines on the same subnet (approximately 50 laptop/desktop computers).

OPC Servers Tested

Below is a list of the OPC servers that we tested with:

  • Cimquest
    InGear Allen-Bradley OPC Server Version 3.0
  • Cyberlogic
    OPC Server 6.00
  • Ellipse
    Ellipse Drivers OPC 1.1.0
  • Ellipse
    Ellipse SCADA v2.27
  • Emerson Process Management
    DeltaV OPC Servers 8.1
  • Gesytec GmbH
    Easylon OPC Server M 2.30.22
  • Iconics
    DataStore OPC Server 3.12
  • Iconics
    Modbus Ethernet Server 3.12
  • Indusoft
    CEView OPC Server 6.0 SP4
  • Indusoft
    Indusoft Web Studio OPC Server 6.0 SP4
  • Invensys
    AIM OPC Server 3.3
  • Invensys
    DASMBSerial 2.0
  • Invensys
    FS Gateway 2.0.02
  • Kepware
    KepServer
  • Matrikon
    MatrikonOPC Universion Server 2.0.0.0
  • MSIndustrie Software GmbH
    MSIPCServerW 1.0
  • Descartes Systems Sciences Inc
    OMNIServer
  • OSISoft
    OPC Data Access and Historical Data Access Server for PI
  • Power Measurement
    ION Enterprise 5.5
  • Pressco Technology
    Intellispec OPC Server 4.0
  • Rockwell Software
    RS OPC Gateway 2.0
  • Siemens AG
    MiniWeb COM DA Server 2.07
  • Siemens AG
    Simatic WinCC flexible 2005
  • Siemens AG
    Simatic WinCC v6.0 SP3
  • Sisco Inc
    AX-S5 ICCP 3.0159
  • SMAR
    HSE Foundation Fieldbus Server 3.8.2.2
  • Takebishi Electric Sales Corp
    DeviceXPlorer MELSEC OPC Server 3.10 Build 2
  • Takebishi Electric Sales Corp
    DeviceXPlorer SYSMAX OPC Server 3.10 Build 2
  • Takebishi Electric Sales Corp
    DeviceXPlorer TOYOPUC OPC Server 3.10 Build 2
  • Software Toolbox
    TOPServer
  • Woodhead Software and Electronics
    DeviceNET OPC Server 1.0.3.0

If your OPC server vendor is not listed it does NOT mean that our OPC Data control will not work with it - if the OPC Server follows the specs, the OPC Data Control should work fine all the same. It only means that vendor was not present at the Interop Workshop. If your OPC Server vendor has never attended an OPC Interop workshop, you as their customer should encourage them too -- it's a great technical session and a great opportunity for them to test out their products with others - we'll be there doing the testing so you as the customer don't have to!

There were no issues found that were issues with the OPC Data Control client application with any of these servers in testing. If you will be using one of these servers and wish to discuss any server side issues that were seen (that may be resolved by now by the server vendor), please contact us

 

 | HOME | PRODUCT DETAILS | FREE DEMO | PRICING & LICENSING | RELATED PRODUCTS | SUPPORT | ABOUT US

P: 1-888-665-3678 (US-Sales) or 704-849-2773 (Support & International), F: 704-849-6388
148A East Charles Street, Matthews, North Carolina, USA 28105
Copyright Software Toolbox, Inc., 1996-2006, All Rights Reserved Worldwide.